JEEP WRANGLER JK (2007-2018) – Lift Kits

Notes: 35″ tires will clear but rubbing may occur with extreme articulation If planning on running 35″ tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links. 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)

Notes: Does NOT fit 4-door (Unlimited) models. 2012-2018 models require exhaust modifications to clear the front driveshaft. (#1030) On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.