New Arrivals

Notes: Does NOT fit 2-door models. 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030) On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.

Notes: Increased ground clearance
Levels front with rear
Forged Adj front track bar
N3 shocks

Notes: Fits models with 3.5 – 6in suspension lift kits. This kit MUST be used with a stock pitman arm. MUST be used with track bar relocation bracket. If choosing “Drag Link Only” option, please ensure your vehicle has a track bar relocation bracket. Does NOT work with aftermarket drop pitman arms This kit can be used on Jeeps with 3.5ΓÇ¥-4inch of lift if equipped with a factory track bar. This kit can be used on Jeeps with 4.5ΓÇ¥-6inch of lift with Rough Country’s forged adjustable track bar or similar aftermarket, adjustable track bar.

Notes: Does NOT fit diesel models. ONLY fits Mojave models.

Notes: Sold in pairs.

Notes: Sold in pairs.

Notes: nan

Notes: The use of stock wheels with larger than stock tires may cause the tire to come in contact with the lower control arm at full turn. Aftermarket wheels are recommended.