LIFT KITS
Showing 37–45 of 121 resultsSorted by latest
-
LIFT KITSRough Country 4 Inch Lift Kit X-Series V2 Jeep Wrangler JK 4WD 2007-2018
Notes: Does NOT fit 4-door (Unlimited) models. 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030) On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
LIFT KITS6.5 Inch Lift Kit Long Arm NP231 for Jeep Cherokee XJ 4WD 1984-2001
Notes: ONLY fits models with NP231 transfer case. Does NOT fit models with 2.8L V-6 engine. Does NOT fit models diesel engine. Does NOT fit 87-89 models with Peugeot manual transmissions. If running 35″ tires, they will require fender trimming to clear.
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
LIFT KITS4in Long Arm Suspension Lift Kit for Jeep Wrangler TJ 1997-2006
Notes: Does NOT fit Unlimited models. A Slip Yoke Eliminator with CV Driveshaft is recommended to avoid driveline vibration. Rubicon models do not need a SYE kit or transfer case drop but a CV driveshaft is still recommended. Exhaust will have to be cut and rerouted to make sure it is away from the moving components.
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
LIFT KITSRough Country 2.5 Inch Lift Kit 6 Cyl V2 Jeep Wrangler TJ 1997-2006/Wrangler Unlimited 2004-2006
Notes: Does NOT fit models with 4cyl engine. The use of stock wheels with larger than stock tires may cause the tire to come in contact with the lower control arm at full turn. Aftermarket wheels are recommended.
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
LIFT KITS3.5 Inch Lift Kit Springs N3 for Jeep Gladiator JT 4WD 2020-2023
Notes: Increased ground clearance Levels front with rear Forged Adj front track bar N3 shocks
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
LIFT KITS3 Inch Lift Kit Rear Springs for Jeep Grand Wagoneer, J10 Truck, J20 Truck, Wagoneer 4WD
Notes: nan
1 In Stock (1 SG | 0 SI | 0 USA)(0 reviews) -
LIFT KITS3.5 Inch Lift Kit Spacers for Jeep Gladiator JT 4WD 2020-2023
Notes: Increased ground clearance
Levels front with rear
Forged Adj front track bar
N3 shocks2 In Stock (1 SG | 1 SI | 0 USA)(0 reviews) -
LIFT KITS2.5 Inch Leveling Kit Spacers for Jeep Gladiator JT 4WD 2020-2023
Notes: 35″ tires will clear but rubbing may occur with extreme articulation If planning on running 35″ tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links.
1 In Stock (1 SG | 0 SI | 0 USA)(0 reviews) -
LIFT KITS4.5 Inch Lift Kit RR Springs X-Series for Jeep Cherokee XJ 1984-2001
Notes: A Slip Yoke Eliminator with CV Driveshaft are highly recommended to avoid driveline vibration. Rough Country’s NP231 SYE available here! SKU: 50-7907 Rough Country’s replacement cv driveshaft available here! SKU: 5076.1
2 In Stock (1 SG | 1 SI | 0 USA)(0 reviews)
