Shop
Showing 6310–6318 of 28802 resultsSorted by latest
-
Complete Soft Top Kit with Clear Windows for Jeep Wrangler TJ 1997-2006 with Full Steel Doors
Fits:
- 2006 Jeep Wrangler TJ (1997-2006)
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
Complete Soft Top Kit with Tinted Windows for Jeep Wrangler TJ 1997-2006 with Full Steel Doors
Fits:
- 2006 Jeep Wrangler TJ (1997-2006)
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
2.5in Series II Spacer Lift Kit with N3 Shocks for Jeep Wrangler JK 2007-2018
Notes: 35″ tires will clear but rubbing may occur with extreme articulation If planning on running 35″ tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links. 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
1.75in Spacer Lift Kit with N3 Shocks for Jeep Wrangler JK 2007-2018
Notes: nan
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
4in X-Series Suspension Lift Kit with N3 Shocks for Jeep Wrangler JK 2007-2018
Notes: Does NOT fit 4-door (Unlimited) models. 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030) On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
4in Suspension Lift Kit with N3 Shocks for Jeep Wrangler JK 2007-2018
Notes: Does NOT fit 4-door (Unlimited) models. 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030) On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
6in Long Arm Suspension Lift Kit for Jeep Wrangler Unlimited TJ 2004-2006
Notes: Fits Unlimited models ONLY. A Slip Yoke Eliminator with CV Driveshaft is recommended to avoid driveline vibration. Rubicon models do not need a SYE kit or transfer case drop but a CV driveshaft is still recommended. Exhaust will have to be cut and rerouted to make sure it is away from the moving components.
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
4in Long Arm Suspension Lift Kit for Jeep Wrangler Unlimited TJ 2004-2006
Notes: Fits Unlimited models ONLY. A Slip Yoke Eliminator with CV Driveshaft is recommended to avoid driveline vibration. Rubicon models do not need a SYE kit or transfer case drop but a CV driveshaft is still recommended. Exhaust will have to be cut and rerouted to make sure it is away from the moving components.
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews) -
4 Inch Lift Kit for Jeep CJ 7 4WD 1982-1986
Notes: ONLY fits models with power steering.
On Backorder (0 SG | 0 SI | 0 USA)(0 reviews)
